Top 10 Charge Controller 30A – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. EPEVER

#ad

EPEVER MPPT Solar Charge Controller 30 amp 12V 24V Auto, 30A Solar Charge Controller Max 100V Input Negative Grounded Solar Reulator for Lead-Acid and Lithium Batteries Charging and Discharging

#ad
EPEVER #ad - Auto control system to limit the charging power & current go over the rated value. Mppt solar charge controller 30a : 12v/24v auto identifying. Solar charge regulator comes with rs-485 communication bus interface, it can be monitored by cellphone APPEBox required, It is Standard MODBUS interface, PC Software and MT50 remote meter.

30 amp mppt controller max input solar panel power: 390w/12V, 780W/24V. Solar controller mppt support for 4 type battery charging and dischargeing: Lead-acid Sealed, Lithium and User-defined. Compatible with agm batteries, Gel, Flooded, User mode allow you set your own charging parameters. Max 100vvoc PV input. Battery temperature compensation function. Real-time energy recording and statistical.
BrandEPEVER #ad
ManufacturerEPEVER #ad

2. Binen

#ad

Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, 30A Solar Charge Controller

#ad
Binen #ad - Please be careful to install the charger controller on a flat, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, well-ventilated place. Fully 3-stage pwm charge management, open-circuit protection, the solar controller will turn off automatically.

Multiple protection functions: binen solar controller has short-circuit protection, improve system efficiency and prolong the life span of the battery. Dual usb output 5V/2. 5a max, to support mobile phone chargeing. 30a solar charge controller : binen solar charger controller are ul 1741 certified, the solar charger controller compatibility with 12V 24V system. Easy to install and operate: the charge controller should connect the battery first, low heat production. Discharge current: 10a, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system.

Lcd display: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc. For protecting the lifespan of your battery, liions, once the voltage of the battery drop below 8V, AGM, it is not suited for nickel hydride, GEL, the solar controller will turn off automatically. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, lithium, or other batteries.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

3. PowMr

#ad

Solar Charge Regulator 30 amp Max input 360W/12V/, for Lead-Acid Gel Sealed Flooded BatteriesVS3024AU, EPEVER 30A Solar Charge Controller 12V/24V Auto, 720W24V with LCD Display and Dual USB 5V Output

#ad
PowMr #ad - Make more safe and longer battery lifespan. Ul and vde certified terminals charge controller, High reliability components of ST, IR and Infineon controller; with temperature compensation.

Battery type selectable: Sealed default, and Flooded;. Solar panel charge controller 30A with humanized button settings, operation will be more comfortable and convenient. Solar regulator lcd display: pv voltage, kwh, work Mode, Current, Kwh, Load Current, Current, temperature, BAT Volt, one key to zero clearing PV energy function.330a solar charge controller 12v / in 24v. With dual 5v / 24v auto work; max input voltage: 50; Max PV power 360W /in 12V, 720W / 2. 4atotal USB output. Positive ground solar charge controller 30 amps with 3-stage Intelligent PWM charging: Bulk, Gel, Boost/Equalize, Float.
BrandPowMr #ad
ManufacturerEPEVER #ad

4. Renogy

#ad

And Flooded batteries and Renogy Bluetooth Module, Sealed, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, Gel

#ad
Renogy #ad - Multiple led indicators for easy to read charge status and battery information. Then secure each cable by rotating the screws clockwise CW to the closed position.

Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW. Optimized for a 12v system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.29 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller

5. Renogy

#ad

Flooded and Lithium Batteries, Gel, Renogy Adventurer 30A 12V/24V Negative Ground PWM Flush Mount Charge Controller with LCD Display, Compatible with Sealed

#ad
Renogy #ad - 4a usb port on the front display can be used to charge mobile phones, speakers, tablets, etc. Rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy DC Home smartphone app. Compatible with 12v and 24v system; Deep cycle Sealed, Gel, Flooded and Lithium battery option ready.

Intelligent protection against: reverse polarity, overcharging, short-circuit and reverse current. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Smart 4 stage pwm charging bulk, boost, float and Equalization and temperature compensation increases battery life and improves system performance.

An included surface Mount Attachment allows for versatility in mounting. Any negative connection on the solar module, battery and load can be safely earth grounded as required. 5v 2. Designed to cleanly flush mount on walls, providing a sleek, integrated look. The adventurer is a negative ground controller. Backlit lcd screen for displaying operating information and error codes.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.9 Inches
Length6.56 Inches
Weight0.6 Pounds
Width4.5 Inches
Part NumberRNG-CTRL-ADV30-LI
ModelAdventurer 30A Li 12V/24V
WarrantyNEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.

6. Renogy

#ad

& Flooded Batteries & Bluetooth Module, Grey, Renogy Rover 30 Amp 12V/24V MPPT Solar Charge Controller Battery Regulator Compatible with Lithium Sealed, Gel

#ad
Renogy #ad - 4-stage charging bulk, boost, and Equalization and temperature compensation increase your battery life and improve your system's performance. Rs232 port allows the rover pg to communicate with the BT-1 Bluetooth module, which can pair with the RenogyDC Home smartphone app.

Intelligent protection built-in against reverse polarity, overload, short-circuiting, over-discharging, overcharging, and reverse current. Compatible with 12v and 24v systems. Aluminum heat sink allows for efficient heat dissipation. Positive ground controller featuring innovative mppt maximum power point tracking technology with high tracking efficiency up to 99%, Float, maximizing the energy from solar panels to charge your system.

Also compatible with various Deep Cycle battery options: Sealed, Flooded, Gel, and Lithium 12.8v lfp. Power source type: Solar-Powered. Lcd screen and multiple led indicators for displaying system operation information, customizable parameters, and error codes.
BrandRenogy #ad
ManufacturerRenogy #ad
Height4 Inches
Length10 Inches
Weight4 Pounds
Width7 Inches
Part NumberRNG-CTRL-RVRPG30
ModelRover 30 Amp 12V/24V

7. Renogy

#ad

Renogy Rover 30 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery

#ad
Renogy #ad - 4-stage charging: bulk, Float, overload, and short circuit. Automatically detect 12v or 24v dc system voltages innovative mppt technology with High tracking efficiency up to 99% and peak. Conversion efficiency of 98%.

Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. Error code detection for easy self diagnoses. Electronic protection: overcharging, and equalization and LCD screen with programmable charging parameters. Compatible with various deep cycle battery options: sealed, boost, gel, over-discharging, flooded, without causing damage to any component.

Reverse protection: any combination of solar module and Battery, and lithium. Customizable charging voltages. Charges over-discharged Lithium-Ion batteries. Rs232 port allows the rover to communicate with the bt-1 Bluetooth module, which can pair with the Renogy DC Home Smart phone app.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Width6.81 Inches
Part Numberfit for Gel Sealed Flooded and Lithium
Modelfit for Gel Sealed Flooded and Lithium
Warranty2-year material and workmanship warranty

8. PowMr

#ad

PowMr 30A MPPT Charge Controller 12V 24V auto, Negative Ground, Energy-Recording, Weatherproof Solar Charge for Sealed Gel Flooded Battery

#ad
PowMr #ad - Power-off Memory Settings. Available for DC load. Ports: 4 AWG. This negative ground mt series - 30a mppt charge controller max input current: 30 amp; max input solar power : 360W12V; 720W24V; Max input Voltage: 50V; with tracking efficiency no less than 99.

9% and 12v/24v auto identifying system voltage, maximizing get more energy from solar panels into your battery. Common negatIVE Ground. Real-time energy recording and statistical. Common negative ground, 4-stage charging bulk, Float, Boost, and Equalization and temperature compensation process has been optimized for long battery life and improved system performance.

Full electronic protection> solar-overload/ solar-short-circuit/ Low-voltage disconnect/ Over-charge/ High-temperature-current limit/ High-input-voltage-current-limit protection. When the input power exceeds a certain level and the charging current is larger than the rated current, the controller will automatically lower the charging power and bring the charging current to the rated level.
BrandPowMr #ad
ManufacturerPowMr #ad

9. Victron Energy

#ad

Victron Energy SmartSolar MPPT 100V 30 amp 12/24-Volt Solar Charge Controller Bluetooth

#ad
Victron Energy #ad - The smartsolar charge controller will even recharge a severely depleted battery. By constantly monitoring the voltage and current output of your solar PV panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.

You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Smartsolar mppt 100-volt 30 amp: a solar charger gathers energy from your solar panels, and stores it in your batteries, fastest technology, Using the latest, SmartSolar maximises this energy-harvest. The intelligent load output function prevents damage caused by running batteries 'flat'.
BrandVictron Energy #ad
ManufacturerVictron Energy #ad
Height3.54 Inches
Length8.07 Inches
Weight2.82 Pounds
Width5.12 Inches
Part NumberSCC075015060R
ModelSCC110030210

10. EPEVER

#ad

EPEVER MPPT Solar Charge Controller 30A 12V/24V Auto Solar Panel Charge Controller Max.PV 150V Solar Charge Regulator with MT50 Remote Meter + Temperature Sensor RST + PC Monitoring Cable RS485

#ad
EPEVER #ad - Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance. Wide mpp operating voltage range. Mppt solar regulator can be widely used for various applications, e.

G. Solar rv, household system and industrial field monitoring, etc. 12/24vdc automatically identifying system voltage, support 4 charging options: Sealed, and has multiple load control modes: manual control, light on+Timer and time control, Gel, light ON/OFF, Flooded and User. Die-cast aluminum design, ensuring excellent heat dissipation characteristic.

Available to meet various communication requirements in different situations. Solar panel charge regulator with rs485 interface, it can be monitored by cellphone APPeBox required, PC Software and MT50 remote meter. Advanced mppt maximum power point tracking technology, tracking efficiency no less than 99. 5%, maximum conversion efficiency of 98%.
BrandEPEVER #ad
ManufacturerEPEVER #ad
Weight2.52 Kilograms
Part NumberTracer3215BN+MT50+RTS+RS485