Top 10 Solar Charge Controller 30A – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. Renogy

#ad

Sealed, Gel, Renogy Wanderer Li 30A 12V PWM Negative Ground Charge Controller Compatible with Lithium, and Flooded batteries and Renogy Bluetooth Module

#ad
Renogy #ad - Multiple led indicators for easy to read charge status and battery information. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.

Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Optimized for a 12v system; Deep cycle Sealed, Flooded, Gel, and Lithium battery option ready. Then secure each cable by rotating the screws clockwise CW to the closed position. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.76 Inches
Length6.45 Inches
Weight0.3 Pounds
Width4.31 Inches
Part NumberRNG-CTRL-WND30-LI
ModelCharge Controller
Warranty1-year material and workmanship warranty

2. Depvko

#ad

Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display 30a, 2021 Upgraded 30A Solar Charge Controller

#ad
Depvko #ad - Safe to use: equipped with overcurrent protection, inverse connection protection, low voltage, and overcharge protection, short-circuit protection, and have fully 3-stage PWM charge management. Lcd display: let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.

If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement. This 30a solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery. Upgraded solar panel controller: compatible with 12v 24v system. This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller.

Warranty: 12-month warranty and lifetime technique support. Please note: the charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.
BrandDepvko #ad
ManufacturerDepvko #ad

3. EEEKit

#ad

Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter, EEEKit 30A Solar Charge Controller, Solar Panel Charger Controller 12V/24V

#ad
EEEKit #ad - Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc. Dual usb 5v/3a output ports support mobile phones, suitable for lead-acid batteries: OPEN, tablet PCs or other devices that require 5V voltage.

Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. The solar controller will turn off automatically once the voltage is too low. Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, AGM, GEL.

Reliable protectioneeekit solar charge regulator provides over-current protection, low voltage and overcharge protection, short-circuit protection, inverse connection protection, a reliable protector for your devices. Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338

4. Renogy

#ad

Black, Renogy Advanced Rover Li 40 Amp 12V/24V DC Input MPPT Solar Charge Controller with Bluetooth and LCD screen and multiple LED indicators

#ad
Renogy #ad - The bt-1 bluetooth module is a great addition to any renogy charge controllers with a rs232 port and is used to pair charge controllers with the renogy dc home app. Electronic protection: overcharging, flooded, gel, over-discharging, without causing damage to any component.

Rs232 port allows the rover to communicate with the bt-1 bluetooth module, which can pair with the renogy dc home smart phone app. After pairing is done you can monitor your system and change parameters directly from you cell phone or tablet. 4-stage charging: bulk, and short circuit. Conversion efficiency of 98%. Reverse protection: any combination of solar module and battery, and equalization and lcd screen with programmable charging parameters.

Error code detection for easy self diagnoses. Customizable charging voltages. Charges over-discharged lithium-ion batteries. Die-cast aluminum design for heat dissipation and the capability of measuring the battery's temperature and remote monitoring. Compatible with various deep cycle battery options: sealed, float, overload, boost, and lithium. Automatically detect 12v or 24v dc system voltages innovative mph technology with high tracking efficiency up to 99% and peak.
BrandRenogy #ad
ManufacturerRenogy #ad
Height2.85 Inches
Length9.37 Inches
Weight1.39 Pounds
Width6.81 Inches
Part NumberRNG-CTRL-RVR40-BT
ModelRNG-CTRL-RVR40-BT
Warranty2-year material and workmanship warranty

5. PowMr

#ad

30amp Charge Controller, PWM Solar Controller 30A Fit for MAX 1500W Solar Power 12V 24V 36V 48V Lithium/AGM/Gel/Flooded Battery

#ad
PowMr #ad - Controller automatic temperature compensation and Full protection, Over-Load, Battery Reverse, like Reverse-Polarity, Over-Current, Over-Heating, Low-Voltage Lightning Protection.

Double usb output 5v/2a and lcd display with Back-lighting shows device’s operating data and working condition. 30a pwm solar controller, flooded and lithium battery licoMnNiO2, intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery Sealed, Gel, LiFePO4. Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control. 4 stages pwm charging: Bulk, Absorption, Equalize, Float;.
BrandPowMr #ad
ManufacturerPowMr #ad

6. Saooer

#ad

12V/24V Solar Panel Intelligent Regulator with Dual USB Port and PWM LCD Display, 30A Solar Charge Controller,MPPT Solar Charger Controller

#ad
Saooer #ad - Easy to usecharge controllers for solar panels should connect the battery first, industrial, and finally the load. Lcd display, adjustable parameter, then the solar panel, suitable for home, commercial etc. Solar charge controllerthe solar charger controller compatibility with 12V 24V system.

Lcd displaycomes with a display that can clearly indicate the status and data, solar charger can be conveniently switched modes and parameter configuration. Discharge current is 30a, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Smart lcd display shows the charging status and battery status to make you more assured of charging.

Dual usb, to support mobile phone chargeing. Safety chargingadopt abs flame-retardant shell, open-circuits, Built in circuit protection guards against reverse polarity, overcharging, fireproof, over-current, electric shock, sparks, solid and durable, corrosion resistant, short-circuits and overheating. Battery typefor protecting the lifespan of your battery, once the voltage of the battery out of range, the solar controller will turn off automatically.
BrandSaooer #ad
ManufacturerSaooer #ad
Height2.17 Inches
Length7.48 Inches
Width3.94 Inches

7. EPEVER

#ad

For Lead-Acid and Lithium Batteries, Solar Charge Controller Max 100V Input Negative Grounded Solar Regulator, EPEVER MPPT Solar Charge Controller 30A 12V 24V Auto

#ad
EPEVER #ad - Mppt charge controller with blackligh LCD screen for displaing system information and working condition. Die-cast aluminum design allows for efficient heat dissipation. Negative ground charge controller featuring advanced MPPT technology with high tracking efficiency up to 99.

5% and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system. The tracer an's charging process has been optimized for long battery life and improved system performance. It includes a 4-stage battery charging Bulk, Float, Boost, and Equalization and temperature compensation increase your battery life and improve your system's performance. Multiple load control method, APP and MT-50 .

This mppt controller protection built-in against reverse polarity, overload, overcharging, over-discharging, short-circuiting, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Auto identifying 12V/24V DCsystem voltage. Also compatible with various Deep Cycle battery options: Sealed, Gel,. Solar charge regulator support pc software, flooded and lithium.
BrandEPEVER #ad
ManufacturerEPEVER #ad

8. SUNYIMA

#ad

SUNYIMA 30A MPPT Solar Charge Controller with LCD Display Dual USB Multiple Load Control Modes,New Mppt Technical Maximum Charging Current 30A

#ad
SUNYIMA #ad - Reliable protectionovervoltage, non-stop detection during charging, overload, overcharge, high charging efficiency, over discharge protection function;Automatic focusing MPPT tracking charging, short circuit, bidirectional focusing tracking. Please attentionpls note the connection ways, then connect the solar panelYou can't reverse the order.

The place that don't understand pls contact us, Connect the battery first, Thanks!. Multi-function lcd displaysthis controller is 12v/24v 12v/24v automatically adapt, make sure the battery has enough voltage, first connect the battery, then connect the solar panels, when you first use it, so that the controller can recognize the correct battery type. Industrial-grade master chip16aD sampling accuracy, discharge current accurate real-time display, temperature Charging current, power generation at a glance.

Dual usb 30a mppt solar charge controller using innovative mppt technology high tracking efficiency up to 99%;Please refer to the information if you are not familiar with Mppt technology:There are many kinds of MPPT technology, Our Solar Controller Mppt technology is to detect the maximum charging current, not the boost type or the automatic charging of the solar panel voltage.
BrandSUNYIMA #ad
ManufacturerSUNYIMA #ad

9. First Solar

#ad

Solar Charge Controller 30A PWM 12V 24V 360W Solar Panel Charger Discharge Regulator with USB Output Multip Circuit Protection Anti-Fall Durable ABS Housing Heat Sink 30A

#ad
First Solar #ad - Easy to install and operate: the charge controller should connect the battery first, low heat production. 30a solar charge controller : first solar charger controller are ul 1741 certified, build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system.

Note: the charge controller will heat up when it is running. Multiple protection functions: first solar controller has short-circuit protection, once the voltage of the battery drop below 8V, open-circuit protection, reverse protection, improve system efficiency and prolong the life span of the battery. Lcd display: comes with a display that can clearly indicate the status and data, industrial, suitable for home, it can be conveniently switched modes and parameter configuration, commercial etc. Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order.

Dual mosfet reverse current protection, then the solar panel, well-ventilated place. Discharge current: 10A, to support mobile phone chargeing. For protecting the lifespan of your battery, the solar controller will turn off automatically. Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, AGM, Liions, once the voltage of the battery drop below 8V, lithium, it is not suited for nickel hydride, GEL, or other batteries.
BrandFirst Solar #ad
ManufacturerOOYCYOO #ad

10. EPEVER

#ad

EPEVER MPPT 30A Solar Charge Controller, 30 Amp Solar Charge Regulator Mppt 12V/24V Auto Max 100V Input Negative Grounded Controller with LCD Display for Gel Sealed Flooded Lithium Battery Charging

#ad
EPEVER #ad - Max input Voltage: 100V. Available to meet various communication requirements in different situations. 30a solar controller mppt support for 4 type battery charging: lead-acid sealed, Gel, Flooded, AGM, User and Lithium.

Mppt solar charge controller 30a: 12v/24v auto identifying system volt. Real-time energy recording and statistical. Solar panel charge regulator with rs485 interface, it can be monitored by cellphone APPeBox required, PC Software and MT50 remote meter. 30 amp charge controller max input solar panel power: 390w/12V, 780W/24V. Auto control system to limit the charging power & current go over the rated value. It protect the battery from being over-charged by the solar modules and over-discharged by the loads. Battery temperature compensation function to ensure the controller’s life.
BrandEPEVER #ad
ManufacturerEPEVER #ad