Top 9 Ammeter DC Current – Electrical Testers

As an Amazon Associate I earn from qualifying purchases.

1. bayite

#ad

Bayite DC 5-120V 100A Mini Digital Current Voltage Amp Meter Ammeter Gauge with Hall Effect Sensor Transformer

#ad
bayite #ad - Electrically isolated from high voltage power source which eliminates risk to delicate monitoring equipment and also minimizes safety concerns.

Display voltage or + -current; voltage Range: 5V-120V; Current range: 0-100A. For example, if your current signal is only 02 amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 2. 0 amps. Through-hole design: easy Wiring; Measure positive or negative current; No current direction limitation. Loop through sensor multiple times to strengthen signal. Compatible with large wire; Diameter of the hole through sensor is 3/4 inch19 mm.
Brandbayite #ad
Part NumberBYT-VAM-033

2. bayite

#ad

Bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

#ad
bayite #ad - With overload alarm function If active power is larger than threshold, backlight and power value will flash. Warranty:1-year free replacement or full refund without return. 4 in 1 meter; large-screen LCD displays voltage, active power, current, energy at the same time. The blue backlight can be turned on/off manually. Test range: voltage: dc 6. 5~100v; current: 0~100a; power: 0~10kW; Energy: 0~9999kWh. Store energy data when power off can be reset to 0 .
Brandbayite #ad
ManufacturerECSEM #ad
Height3.54 Inches
Length1.97 Inches
Width0.96 Inches
Part NumberB013PKYILS
ModelPZEM-051

3. DROK

#ad

DROK 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Sensor, Charge-Discharge Monitor

#ad
DROK #ad - Application - can be used as battery charge-discharge tester meter for automobile and car battery; as battery capacity monitor for photovoltaic system; as voltage meter, current meter, power meter, etc.

Protection - over-voltage protection, time limitation, over-power protection, over-current protection, over-charged protection, etc. Bidirectional ammeter - the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging. Other features - lcd color display; ah power off memorized function; time & AH resettable; calibration function; automatically/manually switch off LCD screen; with output control button to enable/disable output requires a relay. 7-in-1 multimeter - measure and display voltage 0-90V, battery capacity, amp-hour, current 0-100A, power, watt-hour and time simultaneously.
BrandDROK #ad
ManufacturerDROK #ad

4. DROK

#ad

Ammeter Voltmeter for Solar System Setup Power Energy Capacity Volt Current Detector Panel with Hall Sensor, Battery Monitor DC 0-300V 200A, DROK Voltage Amp Meter DC

#ad
DROK #ad - With function of storing date when power down, battery capacity monitor. Hall sensor & easy mount: the voltage amperage meter is coming with a Hall transformer to for isolated measurement, reliable and safe; accepting two-wire system connection and three-wire system connection, could be powered DC5~90V, easy and simple to wire this meter up.

Voltage measurement range is dc 0-300v, dc positive and negative bidirectional current, DC positive and negative power, DC voltage, current measurement range is 0-200A. Alarming function: it will alarm and flash to draw your attention when the real voltage is higher or lower than preset alarming voltage and real current is higher than preset current; It will also alarm and flash to remind you to charge for your device when the remaining capacity of battery is low. Multifunctional meter: drok multimeter panel is available to measure percentage and aH of remaining capacity, DC positive and negative bidirectional accumulated electric energy.

Suitable for all kinds of batteries, Lithium Polymer batteries, power meter, digital volt meter, no need to worry that your electric data will be lost. Wide applications: can be used as dc amp meter, such as lead-acid batteries, using this meter, lithium iron phosphate batteries and etc. Display: backlight can be controlled to be on or off as user’s need; Equipped with full angle of view LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine.
BrandDROK #ad
ManufacturerDROK #ad
Weight0.2 Pounds
Part Number2001712003US

5. Baomain

#ad

Baomain DH-670 DC 0-50A Analog Amp Panel Meter Current Ammeter with 75mV Shunt

#ad
Baomain #ad - Scale range : DC 50A. Screw dia: 2. 8mm/ 011", 3. 7mm/ 015";weight:148g. Face size: 70 x 60mm/ 2. 8 x 2. 4 inchL*W. Overall depthscrew not Included: 3. 5cm/ 1. 4 inch. Analog amp panel meter Current Ammeter DC 0-50A+Shunt.
BrandBaomain #ad
ManufacturerBaomain #ad
Weight0.26 Pounds
Part NumberDH-670
ModelDH-670

6. BTMETER

#ad

Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV, BTMETER BT-7200B TRMS 6000 Counts Clamp Multimeter

#ad
BTMETER #ad - Clamp on live wire for measurementto measure amp with this clamp meter, you muST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. Large digital displaywell built with backlit lcd for visibility in dimly light areas.

Jaw caliber Size 1. 77 inches 45mm. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full. Easy to use in non-contact ampere measures, AC/DC Voltage, troubleshoot electrical problems in, HVAC. Ac dc clamp amp voltmeter w/ ncvthis clamp multitester can accurately measure ac/dc amperage, Diode, motors, household appliances, frequency or duty cycle, Resistance, Capacitance and also provides Noncontact AC VoltageNCV detection, Continuity Buzzer and Temperature℃/℉ tests. Reliable true rms voltage amperage meter01 amp resolution for 01 ~ 60a ac dc current, 1a for 60 ~ 400a to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery.

The curve graph w/ timing will show you the changes of amp volt flow more visually. Extensible thermocouple probe support measures high temperature from -4 to 1832℉-20 to 1000℃. Continuous data logging clamp dmmthis clamp-on meter can displays ac dc amps, ohms, volts, cap, Hz Temp in Max/Min/Avg on the same interface with real-time reading.
BrandBTMETER #ad
ManufacturerBTMETER #ad
Height1.5 Inches
Length7.6 Inches
Width3.4 Inches
Part NumberBT-7200B

7. DORHEA

#ad

Digital Display Voltage and Ammeter 0.39" LED Voltage Current Display DC 4.5-100V Multimeter Panel Ammeter 0-50A Amp Volt Meter Amperage Monitor Gauge with 50A/75mV Shunt for Automotive Motor Battery

#ad
DORHEA #ad - Dual meter panel display is 039'' crisp and bright LED screen displays voltage & current value. Digital voltmeter ammeter measure voltage DC 4. 5v-100v; operating current 0-50A. Dc current meter voltmeter wide application for monitoring storage battery, solar panel, motor, RV, model railroad, house batteries, motorcycle, etc. Multimeter panel with voltage & current equipped with calibration potentiometer, if there have any error, you can calibrated by yourself. Note - the shunt should be connected when wiring, otherwise the meter will be burnt.
BrandDORHEA #ad
ManufacturerDORHEA #ad
Part NumberD13503-1

8. Proster

#ad

Proster Digital Clamp Meter TRMS 6000counts, with1 PairTest Leads 1 Pair Alligator Clips, 800A DC AC Current AC/DC Voltage NCV Continuity Capacitance Resistance Frequency Diode Hz Test

#ad
Proster #ad - Light alarm if detects the AC Voltage90V-1000V or Live Wire. Low battery display and automatic power off after 15 minutes inactivity. Reliable clamp multimeter with true rmsaccurate ac/dc voltage current, frequency, continuity test and non-contact AC voltage detection, capacitance, diode, resistance, temperature, the Clamp Meter is fully functional and easy to use for labs factories radio-technology and household.

Clamp measuringclamp jaw measures ac current up to 28mm without interrupting the circuit, which makes it much safer to use on mains cables and high current loads in vehicles. Continuity test & overload protection designed to safely and accurately Confirm the Circuit Electricity with Low Voltage Indication and Overload Protection.

Auto-ranging with nvcthe meter will automatically select the appropriate auto range; NCV detects the existence of AC voltage on conductors and cables in-wall, troubleshooting electrical problems in a safe and user-friendly way. Featureshigh resolution, large backlit lcd screen and clamp light to improve visibility in dark place. A soft zippered pouch included keeps everything neatly together and organized; portable to carry and use. Widely used in your life.
BrandProster #ad
ManufacturerProster Trading Limited #ad
Height1.38 Inches
Length7.28 Inches
Weight0.44 Pounds
Width2.56 Inches
Part NumberPSTTL301
ModelPSTTL301

9. DROK

#ad

DROK 6.5-100V 100A 12V 24V 36V 48V 60V 72V Volt Amp Watt Meter, DC Power Meter, LCD Display Multimeter Voltage Current Energy RV Battery Monitor Voltmeter Ammeter Wattmeter Panel with 100A Shunt

#ad
DROK #ad - Data guaranteed -- with power-off storage function, all parameter will be stored automatically when powered off; accumulated energy data can be reset. Large-screen lcd -- display voltage, power, current, energy at the same time. Switchable backlight -- backlight can be turned on/off manually. Parameter -- voltage test range dc 6. 5~100v; current test range 0~100a; power test range 0~10kw; battery level test range 0~9999kwh. Over-voltage alarm & settable alarm voltage -- if active power is larger than threshold, backlight and power will flash as an indicator.
BrandDROK #ad
ManufacturerDROK #ad
Part Number200141AFA
Model200141AFA